Each of the 5 pocket styles are available here as stand-alone light pocket units. You're free to design any combination you desire, such as a single row which spans the entire width of your wall, an even block such as an A4 3x3 layout, or even a mixture of different poster sizes - for example A3 landscape and A4 portrait. Flex the magnetically sealed Perspex front panel to change the poster.
Get creative and design a backboard which you'll be able to mount these light pockets to, instead of mounting them directly. Alternatively, you can purchase a pre-configured back-panel display which are available via the main wall mounted user guide page.
The supply wires at the display end will connect to the light pockets by making contact with the side-grip clamps. At the mains end the supply wires come from the display's power supply, which is plugged into a mains socket, travelling to meet up with the wires running from the display units, typically at a terminal block or junction box.
Plastic covers or conduit can be used to conceal the wires, or alternatively you can chase groves into the wall, or even drill through to the other side if you have access - which becomes a convenient location for the PS. Relatively thin wires will be sufficient because our LED display systems have a very low current consumption.
